How to Maintain Your Hot Water Tank

    hot-water-tanks-winnipegMaintaining your hot water tank is essential for you to be able to ensure that you will be able to use it especially during the cold season. Hot water tanks are definitely one of the things that you can rely on, but it still needs to be maintained properly to ensure that its life will be extended and that it will work efficiently. The good thing about maintaining your hot water tank is that you don’t need to do a lot of things. If this is your first time maintaining your own hot water tank, then reading the information below will surely give you a clear idea on how to do it.

     

    Safety Check

    The first thing that you need to do is to ensure that the power supply it turned off before you start doing anything. Since most of the hot water tanks today are wired, you may need to check the circuit breaker and turn it off from there. Another thing that you need to do is to wear goggles and gloves the entire time that you are working on your hot water tank.

    Check the Pressure Valve

    Typically a hot water tank will have a tube on its upper side, which runs below the tank itself. This is known as the pressure valve, which is used to help relieve all the pressure inside the water tank. Now, if the valve isn’t working the way it should be, then the tank can explode due to too much pressure inside. You can test this by shutting the supply of the cold water to the water heater. Using a bucket, place it under the tank’s valve to ensure that all the drips will be caught while you are testing it. You will know if the valve is working properly if you starting hearing a slight air or a sound that is gurgling inside. But if not, then the valve should be replaced immediately.

    Flushing the Hot Water Tank

    Every six months, you need to flush your hot water tank as this will ensure that any sediments from the water will corrode your tank. If there are too many sediments in it, the efficiency of the hot water tank will be lessened. You may be wondering how you will be able to flush the water inside the tank, but you don’t have to worry about it because it is not as complicated as it may seem.

    The first thing that you need to do is to connect a hose to the tank’s draining valve, which is located underneath the tank. The other end of the hose should be placed in your bathtub or you may also place it outdoors. If you prefer placing it outdoors, then you need to ensure that there are no children and pets near the area. The reason behind this is because the water that will be flowing out of the hose is scalding, which can cause burns and other serious damages. Once you are done placing the hose and once you are done checking the area, open the valve and the draining valve.

    Drain the water tank completely and close it once you are done. The hose should be disconnected before shutting the pressure valve. The faucet for the hot water should be turned on and as well as the cold water, for the supply to be back on your water tank. The reason why the hot water should be turned on is because it will let the air escape from your tank. Now, once you see that the water is starting to flow, you may now turn off the faucet.

    These are the tips on how you can easily maintain your hot water tank. In this way, you will ensure that it will efficiently function the way it is supposed to.

    Trackback from your site.

    Leave a Reply